Synchronise date and time: internet

Your ‘elderly clock’ with date and day indication will show synchronised time with internet, if it is connected to the Wi-Fi. With this feature it automatically adapts to summer and winter time and leap year. If your DayClock is not connected to WiFi, it runs on its internal timer. In the course of time the internal timer can be different from the real time, this is because the internal timer does not know summer or winter time or a leap year. To synchronise date and time with the internet, read the following instructions.

Time setting using your phone’s Hotspot

Activate the Hotspot on your phone or tablet

1. Write down the password of your Hotspot Wi-Fi access
2. Switch on the DayClock and go to the underlying menu using your pin code.
3. Swipe at the right top corner, where the battery charge level is situated, down
4. Turn on the Wi-Fi of the DayClock and choose the Hotspot of your (i)Phone or tablet.
5. Take the password you have written down of your Hotspot and use it to connect to the Wi-Fi.
6. Press ‘enter’ (↩) at the bottom of the page a few times until the display returns to normal again.
7. Your settings have been changed.
8. Close the Hotspot on your phone.
9. ‘Reboot’ your DayClock again.

 

Time setting via manual date and time setting.

1. Zet de DayClock aan en ga naar het onderliggende menu via uw pincode.
2. Swipe at the right top corner, where the battery charge level is situated, down.
3. Press “Settings”
4. Look for “Date and time” in the left menu
5. Tick off the automatic “Time” and Time zone”
6. Press “Set time”
7. Fill in the time and close when ready.
8. Press “Set date”
9. Fill in the data and close when ready
10. Press “Select time zone”.
11. Select “Amsterdam”
12. Tick on the turned-off boxes in the menu on the right.
13. Press ‘enter’ (↩) at the bottom of the page a few times until the display returns to normal again.

Your settings have been changed. Reboot your DayClock when finished. When you have any questions, you can contact us anytime.